Acoples Vent-Lock™ Tipo D Acople x Hembra NPT

Atributos

Presión de Operación Máxima	400 PSI
Peso	4.05 lb
Break Quantity	0
Paquete Opcional/Cantidad por Caja	0
Medida	Dixon's swivel joints are found in blending plants, drum filling applications, fluid and dry bulk transfer, vacuum trucks, oil and gas trucks and water trucks. Larger swivels can be found in the steel industry, marine bulk transfer and many more." (Disc: Halar coated nickel-plated ductile iron mm)
Material	Acero inoxidable 316, servicio pesado
Sello	Nitrilo

Detalles

Designed for use with liquids, consult Dixon for specific recommendations

Other gasket types are available, contact Dixon.

Nitrile Rubber gasket

Resistant to accidental disconnection when dragged. The release lever opens in the direction opposite to the cam arm, so movements that tend to open the release lever also tend to close the cam arm.
Rotating action helps keep the locking device free of debris.
Designed to protect critical parts from impact and to withstand rugged use.

To make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down.
Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter.
No more fumbling with clamps, wire, clips or pins, just close the handles and the locking mechanism is engaged.
Extremely easy to open, the releaser lever is under your thumb when you want to open the fitting, ergonomic.

If the rotating lever is not flush with the handle, it is not properly engaged.

Under no circumstances should cam and groove couplings be used for compressed air or steam service!
Under no circumstances should the EZ Boss-Lock cam arms be used on any fitting not specifically designed for their use.
Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70Â°F / 21Â°C with a standard seal installed. For use at elevated temperature or other unusual operating conditions, consult Dixon.